Utica Boilers

The Utica line of products are designed, tested and assembled to ensure that our customers get the very best in home heating comfort and value. The complete line of gas fired products has earned a reputation for exceptional quality, performance and dependability. Highest quality components, exceptional quality and testing standards are supplemented by a computerized process that tracks components to finished goods.

 

Download Utica UB95M-200 Installation & Operation Manual

UB95M-200 Modulating Condensing Boiler

Utica’s UB95M-200 gas-fired modulating condensing boiler was the first 95% AFUE boiler available and the first gas boiler to qualify for the U.S. Federal Government's $150 Homeowner High Efficiency Tax Credit. Ideal for high efficiency replacement jobs, new homes, radiant heating, and domestic hot water applications, UB95M cost saving features include infinitely modulating capacity from 80 to 200 MBH, outdoor temperature reset, and domestic hot water priority. The UB95's electrical operating costs are lower than other high efficiency boilers because no primary/secondary dedicated piping arrangement is required. One circulator can service the boiler and all zones. Intake and flue gasses can be piped with readily available 3" PVC to 60' and the option of left, right or rear exit for return plumbing and gas piping. Piping connections on the rear and top of the units facilitate multiple boiler installations with boilers in close quarters and the integral condensate trap requires no field assembly. The unit features a standard 115v convenience outlet as well.

·95% AFUE rating
·Sealed combustion
·Direct-vent
·Cast-aluminum mono block heat exchanger
·Integrated modulating boiler control with high limit and probe type low water cut-off
·Direct spark igniter
·Modulating burner, automatic gas valve and blower
·Swing out control panel for easily accessible components
·Safe, economical CPVC and PVC vent pipe
·Natural gas or propane

 

 

 
USC Series Cast Iron Boiler

Select the USC boiler for new construction, replacement or conversion. With an 87% AFUE efficiency rating, the USC offers one of the highest cast iron to Btu heating capacity ratios in the industry. The sealed combustion system mixes outside air and fuel for optimized clean burning. This advanced combustion design not only protects against harmful CO due to poor combustion but also conserves heated air within the living space by utilizing outside air for burning. The USC offers maximum installation flexibility. Vent the USC either directly through a side wall or vertically, utilizing stainless steel vent pipe. A lifetime warranty covering the entire heat exchanger is standard.

·87% AFUE rating
·Sealed combustion
·Flexible side wall or vertical venting
·Long life cast iron heat exchanger
·Water tight cast iron push nipples
·Corrosion resistant stainless steel burners
·Electronic ignition
·Natural gas or propane

Download Utica USC Series Installation & Operation Manual

 

 

 

Download Utica MGB Series Installation & Operation Manual

 

MGB Series Cast Iron Boiler

The MGB Series offers a selection of nine cast iron boilers designed for chimney-vent applications. MGB boilers incorporate an advanced combustion design using atmospheric burners. Choose an optional electronic ignition with standard vent damper and the MGB delivers fuel efficiencies up to 84.1%. Design and packaging features make the MGB easy to install and maintain. An integral draft diverter allows installation of the MGB in areas with only 4 feet of ceiling height.

·84.1% AFUE rating
·Automatic stack damper
·Water tight cast iron push nipples
·Long life cast iron heat exchanger
·Corrosion resistant stainless steel burners
·Natural gas or propane
·Standing pilot or electric ignition
·Natural draft conventional chimney vented

 

 

Trane Interactive Demo
Communicating Systems
Request Info
About Us
Contact Us
Find Us
Custom Sheet Metal
Radiant Heating
Products
Service
Service Plans
Buy It Online